Commercial land clearing and site work in Birmingham & Central Alabama
Archon is the boots-on-the-ground sub for site engineering firms, geotechnical engineers, surveyors, and general contractors across Birmingham and Central Alabama. Access trails, drill rig benches, ROW clearing, pre-construction site prep — we get your crews to where the work is.
Insured · General liability · COI on request · Based in Mount Olive, AL
Built for the firms that build Alabama
Engineering firms call us when the site plan looks great on paper but the rig can't reach the boring location, the surveyor can't see through the brush, or the GC needs a single sub who can clear, bench, and stage a site without three trips back to scope. We've done trail cutting and drill bench construction for apartment-complex geotechnical work, line clearing for boundary surveys, and pre-construction clearing for commercial developers. One number, one COI, one schedule.
What we do for commercial clients
Pre-construction and during-construction site services for engineering, surveying, and contracting firms across Central Alabama and central Alabama.
Geotechnical Drill Rig Access & Boring Pads
Trail-cutting and level bench / pad construction so your geotech crew can mobilize CME, Diedrich, or truck-mounted rigs onto wooded or sloped sites for soil borings, core samples, and SPT testing — without losing a day to access.
Survey Line & Boundary Clearing
Selective clearing along property lines, ROW, easements, and traverse lines so your survey crew can shoot clean shots. We mulch underbrush and small trees, leaving mature canopy alone.
Pre-Construction Site Clearing
Forestry mulching, lot clearing, stumping, and full site prep for apartment, commercial, and subdivision builds. We get the site builder-ready: clean, graded, and on schedule.
Access Roads & Right-of-Way Clearing
Temporary access roads, ROW clearing for utility runs, and brush mulching along existing access — wide enough for haul trucks, low-boys, and your equipment.
Pad Building, Benching & Rough Grade
Cut-and-fill pads, equipment staging areas, lay-down yards, and rough grade for pre-construction. We coordinate with your site civil drawings.
Erosion Control & BMP Support
Silt fence install, construction entrances, basin clearing, and BMP maintenance to keep your site in compliance during clearing and earthwork phases.
Who we work with
Site & Civil Engineering Firms
Subcontract clearing, access, and benching so your geotech and survey crews stay on schedule. We've cut trails and built drill benches for apartment complex pre-construction work.
Geotechnical Engineers
Get your rig to the boring locations on every site — even when the location plan runs through hardwoods, briars, or a creek bank.
Land Surveyors
Line clearing for ALTA, boundary, topographic, and construction stakeout work. Crew-ready sight lines, no time wasted swinging machetes.
General Contractors & Developers
A single sub for clearing, mulching, pad prep, access, and erosion control — one phone call, one insurance certificate, one schedule.
Solar, Utility & Infrastructure
ROW clearing, access road construction, and pad prep for solar arrays, substations, towers, and pipeline routes.
Recent project: drill rig access for an apartment complex
A site engineering firm needed to pull soil borings on a wooded, sloped parcel before an apartment complex broke ground. The boring plan called for sample locations spread across heavy timber on a hillside — no way the drill rig was rolling in cold.
Archon cut access trails through the side of the hill and benched in level pads at every boring location, sized for the geotech rig. Their crew rolled in, pulled core samples on schedule, and rolled out without a single delay for access issues.
That's the standard for every commercial job we run: get the engineering or survey crew to the work, get out of their way, leave the site clean. Read the full write-up →
Leeds, AL — Hillside Access Road & Benching
Cinematic walkthrough of a challenging hillside site: cut access, benched pads, and stable grade — the kind of terrain we handle for developers, engineers, and commercial GCs.
Commercial FAQ
Do you subcontract for engineering firms and general contractors?
Yes. We regularly work as a subcontractor to civil and site engineering firms, geotechnical engineers, land surveyors, and general contractors across Alabama. We carry our own general liability insurance and provide a COI on request.
Can you cut access trails and build benches for geotechnical drill rigs?
Yes — this is one of our most common commercial jobs. We cut access trails through wooded sites and build level drill pads / benches sized to your rig, so your geotech crew can pull soil borings and core samples without getting stuck or losing days to access issues.
How quickly can you mobilize for a pre-construction site?
Mobilization depends on current workload, site access, and scope. Call (205) 547-9410 with the project location and timeline and we will give you real availability and a written schedule.
What service area do you cover for commercial site work?
We are based in Mount Olive, AL and work across Birmingham and Central Alabama — Jefferson, Shelby, Blount, St. Clair, Cullman, and Walker counties — and we travel for larger commercial projects.
Bidding a project? Let's talk scope.
Send the location, plan set, or boring map and we'll put a number together. We're comfortable working off civil drawings, geotech location plans, or a pin drop in the woods.